Front End Loader Grease Caps – Installation Instructions
John Deere, Kubota, and New Holland compact loaders
Tools Required
None. Caps press on by hand.
Before you start
Each cap is numbered. Use the diagram for your loader model to match cap numbers to fitting locations. Count your fittings before you start so you have the right quantity. While you’re at it – test each fitting with the grease gun. Any that won’t accept grease are already clogged and should be replaced before you cap them.
Each cap is numbered. Use the diagram for your loader model to match cap numbers to fitting locations. Count your fittings before you start so you have the right quantity. While you’re at it – test each fitting with the grease gun. Any that won’t accept grease are already clogged and should be replaced before you cap them.
Select your loader model:
John Deere 120R – Non-MSL
Click to open full size. Cap numbers on the diagram correspond to the numbers printed on each cap.
Other loader models
Diagrams for additional loader configurations are being added. If you need a diagram for your specific loader, contact us with your tractor and loader model numbers and we’ll send you the correct one.
Diagrams for additional loader configurations are being added. If you need a diagram for your specific loader, contact us with your tractor and loader model numbers and we’ll send you the correct one.
Not sure if your loader fits?
Send us your tractor and loader model numbers. We’ll confirm fitment before you order.